Saturday, July 01, 2006


I have found some rather elusive D24/D24T tools. See previous post for more info.
The first tool holds the crankshaft pulley while you torque (supposedly) the crankshaft bolt to over 300 ft. lbs. I had though this tool was unavailable... The part number is V5187 and it's made by Baum Tool.

Second tool holds the camshaft sprocket at the front of the engine while you tighten the waterpump to adjust the cam timing (front) belt tension. Baum V5199

There aloso seem to be some other interesting tools that I have not seen, e.g. the pump shaft seal puller...
Here's the link
Happy Wrenching!


Post a Comment

<< Home